Pipe Type Ultrasonic Flowmeter
The pipe type ultrasonic flowmeter consists of the main unit and a pipe type sensor. The DN15-DN32 uses a π-type sensor, and the DN40 and above uses a standard pipe-type sensor. The pipe type ultrasonic flowmeter has the advantages of simple installation, high measurement accuracy, and no pressure loss. Widely used in tap water, heating, water conservancy, metallurgy, chemical, energy and other industries
Key Benefits
- High measurement accuracy and no pressure loss.
- Easy installation: Clamp-on flow meters are easy to install and very portable, which can save work hours and resources
- Less maintenance: Clamp-on devices are not in contact with the measured material and have no moving parts, which greatly increases their lifetime. They are also immune to sensor buildup and can be used on hazardous or corrosive materials without any extra precautions
- Easy calibration: Because of how easy it is to remove them, clamp-on devices can be recalibrated relatively quickly. This leads to even lower maintenance costs and more reliable measurements
- No pressure loss: Installing the meter on the outside of the pipe wall eliminates the problem of pressure loss, which can occur with inline measurements.
Product Description
The CAM-3000F ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closedconduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non-fouling operation and easy installation.
The CAM-3000F transit-time flow meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a specific distance from each other. The transducers can be mounted in V-method where the sound transverses the pipe twice, or W-method where the sound transverses the pipe four times, or in Z-method where the transducers are mounted on opposite sides of the pipe and the sound crosses the pipe once. This selection of the mounting method depends on pipe and liquid characteristics. The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers.
Key feature:
- High accuracy: Linearity: 0.5%, repeatability:0.2%, accuracy up to ±1%.
- Several type transducers for selection, measuring pipe size is from DN15mm to DN6000mm.
- Easy to operate. 10 hours(Fully charged).
- Powerful Recording Function, record the totalizer data of the last 64 days/64 monthes/5 years
- Display: LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc.
Application Range
Clamp-on ultrasonic flow meters can be used in any industrial application where a regular ultrasonic flow meter would do. However, they are especially suited for the following materials
- Water and wastewater industry
- Sewage with small particle content
- Paper and cellulose
- Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.)
- Chemicals (alcohol, acids, etc.)
- Plant effluent
- Beverage, liquid food
- Ultra-pure liquids
- Solvents and other liquids
Technical Specification
| # | Item Name | Parameter Values |
|---|---|---|
1 | Accuracy | Better than ±1% |
2 | Repeatability | Better than 0.2% |
3 | Measurement Period | 500ms |
4 | Liquid Turbidity | Less than 10000ppm, with a little bubble |
5 | Flow Direction | Bi-directional measuring, net flow/heat measuring |
6 | Temperature Range | Standard: -30˚C - 90˚C ，High-temperature：-30˚C - 160˚C |
7 | Power Supply | DC24V |
8 | Measuring Diameter | from DN15mm to DN6000mm |
9 | Signal output | 4-20mA output,impedance 0-1K,accuracy 0.1%, OTC pulse output, pulse width is 6-1000ms, default is 200ms |
10 | Signal input | 3 channels 4-20mA input, accuracy 0.1%, can collect temperature, pressure, liquid level and other signals, Can connect the two three-wire PT100 platinum resistances, to achieve thermal measurement |
11 | Sensor Material : | Carbon Steel; Stainless Steel; SS304; 316L |
12 | Sensor Protection Grade | IP68 |
13 | Connection Type | Flange connection; Thread connection |
Ordering Details
Just need 1 pcs
5 pcs/3 days, 10 pcs/5 days, 50 pcs/10 days
Courier delivery, by sea, by air
Qingao, Tianjin, Shanghai, Shenzhen
T/T, L/C, Paypal, Terms of Payment
12 Months
